The administrator suspects the settings on the switch have been changed, causing the issue. Which of the following should the administrator reference to confirm the change?
A technician needs to connect several computers in close proximity to control manufacturing equipment in a factory. The medium to connect the computers most be cost effective and suitable for short distances Which of the following mediums should the technician use?
A lab environment hosts Internet-facing web servers and other experimental machines, which technicians use for various tasks A technician installs software on one of the web servers to allow communication to the company's file server, but it is unable to connect to it Other machines in the building are able to retrieve files from the file server.
Which of the following is the MOST likely reason the web server cannot retrieve the files, and what should be done to resolve the problem? The lab environment's IDS is blocking the network traffic 1 he technician can whitelist the new application in the IDS. The technician can move the computer to another zone or request an exception from the.
The lab environment has lost connectivity to the company router, and the switch needs to be rebooted. The technician can get the key to the wiring closet and manually restart the switch. The lab environment is currently set up with hubs instead of switches, and the requests are getting bounced back The technician can submit a request for upgraded equipment to management. A network administrator needs to provide authentication servers for a company's network switches.
Which of the following would be the BEST method for meeting these goals? A technician is troubleshooting a previously encountered issue. Which of the following should the technician reference to find what solution was implemented to resolve the issue? Which of the following should be implemented to restrict. A network administrator is looking for an out-of-band method for accessing the console ports of a company's network devices when working remotely. Which of the following can be deployed as a solution?
Toggle navigation. Which of the following should be configured to allow for IP-to-name resolutions? Show Answer Answer: C. Show Answer Answer: A. Options: A. Wireless controller. Show Answer Answer: C, E. Show Answer Answer: B.
Exhausted DHCP scope. Ensure the host-based firewall allows TCP port Privileged user agreement. Show Answer Answer: D. Which of the following should the vendors recommend in response to the quote request?
The use of lightweight APs with a load balancer. Instructions Step 1: Select the tool that was used to create the cable test results. Show Answer Answer: Answer:. Explanation: Step 1 - Cable certifier Step 2 - correctly crimped cable. Packet analysis. Show Answer Answer: C, D. Which of the following Is an object held within an MIB? Modify the speed and duplex. Perform a traceroute command to identify the router that is not functioning.
Verify the host has physical connectivity and is on the correct VLAN. Show Answer Answer: C, F. Create a VLAN for all unused switchports.
Which of the following protocols is used to transport outgoing mail across networks? A systems administrator reviews the following information from the laptop: The administrator was expecting to see a network address within Intrusion detection.
Cat 6 with a repeater placed in the middle of the run. Show Answer Answer: A, D. Remote desktop gateway. Data loss prevention. Which of the following standards BEST fits these requirements? Check the router and firewall to see if ACLs or firmware have changed in the last 24 hours.
Generate new crypto keys. Show Answer Answer: B, C. Which of the following BEST describes the characteristics of a differential backup solution? Backs up files with the creation or modified date as the current date.
Show Answer Answer: E. Man in the middle. Logical diagram. Change the default credentials. Show Answer Answer: A, B. Site-to-site connection. The NAT has not been configured to point to an internal resource. Test the patch in a test environment. The process of grouping network interfaces together to increase throughput is called:. Standard operating procedures. Run a port scanner on each name server to ensure TCP port 53 is open and listening. The address provided by the ISP has a mask that is too small to be used and needs a larger mask.
The address provided by the ISP is the wrong one; they should be using Show Answer Answer: A, C. Deploy a single AP to each adjacent office set to transmit at maximum power. Use a spectrum analyzer to generate a heat map of the gymnasium to pinpoint AP placement. Range Given: All drop downs must be filled. Managed PoE switch. Replace the omnidirectional antennas with unidirectional antennas. Put protective enclosures around the omnidirectional antennas to prevent damage from golf balls.
What has been changed on the web server since the previous day? A technician determines the issue is with a configuration because a ping to a working public website shows a response that starts with: Ping request could not find host Which of the following is the MOST likely misconfiguration? Incorrect netmask. Privileged user accounts. Consistent labeling.
IDF documentation. A vulnerability scan. Remote access VPN. Media converter. An attacker gains unauthorized access to a network by overflowing the CAM table. An attacker gains unauthorized access to a network by placing a rogue AP on the network.
An attacker gains unauthorized access to a network by using double-tagged packets. An attacker gains unauthorized access to a network by scanning and mapping it. Users are able to log into the wireless network with their network credentials after they accept the company root certificate. Which of the following is the wireless network MOST likely using?
Show Answer Answer: B, E. Replication traffic between an on-premises server and a remote backup facility. Transceiver mismatch. Each will have a router and an IP addressed switch, and each floor population will contain a maximum of 30 endpoints.
The engineer uses a packet analyzer and sees retransmitted and malformed packets, as well as some malformed WiMax packets. A workstation is configured with the following network details: Software on the workstation needs to send a query to the local subnet broadcast address. MAC address table. Attempt to log in from another computer with the user's credentials. Which of the following accurately describes a warm site in datacenter disaster recovery?
An online standby datacenter that is fully equipped without company data. A backup datacenter location that is ready for equipment to be installed. An online, standby datacenter that is fully equipped with all company data. The PC has the following information: IP address: 10, The server IP address ends in a network address. Configuration baseline. RJ11 connector and Cal6 cable. The technician can move the computer to another zone or request an exception from the administrator.
Implement server NIC teaming. Which of the following should be implemented to restrict the networks that can access the management interface on the switches? All Rights Reserved. The server team has just installed an application across three different servers.
They are asking that all requests to the application are spread evenly across the three servers. Which of the following should the network team implement to fulfil the request? Salespeople frequently travel nationally and internationally to meet with clients, and often have to roam or switch cellular providers. Which of the following standards is the BEST option to fit the requirements? A network administrator has been given a network of Which of the following indicates the correct IP address range?
A network technician is troubleshooting wireless network issues in a crowded office complex and suspects there is interference from nearby wireless networks. Which of the following should the technician perform to discover possible interference? A network technician is troubleshooting an issue and has established a theory of probable cause.
Which of the following steps should the network technician take NEXT? A network technician has discovered a rogue access point under an empty cubicle desk. Which of the following should the technician perform to ensure another cannot be placed on the network? Which of the following provides the ability to deploy consistent access point configurations from a central location?
A network technician is configuring a wireless network at a branch office. Users at this office work with large files and must be able to access their files on the server quickly. Which of the following A network administrator configures a router with the following IP address information: Gigabit Ethernet 1 Interface: When the router configuration is complete and client devices are reconfigured, all clients report that they are unable to connect to the Internet.
Which of the following is the MOST likely reason? A penetration tester has been tasked with reconnaissance to determine which ports are open on the network. Users are reporting Internet connectivity issues.
The network administrator wants to determine if the issues are internal to the company network or if there is an issue with the ISP. Which of the following tools should be used to BEST determine where the outage is occurring?
Which of the following security mechanisms dynamically assigns a Layer 2 address and restricts traffic only to that Layer 2 address? Which of the following is a vulnerable system designed to detect and log unauthorized access? According to the OSI model, at which of the following layers is data encapsulated into a packet?
A junior network technician is setting up a new email server on the company network. Which of the following default ports should the technician ensure is open on the firewall so the new email server can relay email?
In a service provider network, a company has an existing IP address scheme. Company b uses the following scheme: Subnet 1: Considering this, which of the following is the BEST way for the company to connect these networks? A network engineer is designing a new network for a remote site. The remote site consists of ten desktop computers, ten VoIP phones, and two network printers. In addition, two of the desktop computers at the remote site will be used by managers who should be on a separate network from the other eight computers.
Which of the following represents the BEST configuration for the remote site? A network technician is troubleshooting an end-user connectivity problem. The network technician goes to the appropriate IDF but is unable to identify the appropriate cable due to poor labeling. Which of the following should the network technician use to help identify the appropriate cable? A network technician notices the site-to-site VPN and Internet connection have not come back up at a branch office after a recent power outage.
Which of the following protocols is the technician MOST likely to consider? Choose three. A device operating at Layer 3 of the OSI model uses which of the following protocols to determine the path to a different network? A network administrator is setting up a web-based application that needs to be continually accessible to the end users. Which of the following concepts would BEST ensure this requirement?
Which of the following devices should a network administrator configure on the outermost part of the network? A company finds that many desktops are being reported as missing or lost.
Which of the following would BEST assist in recovering these devices? Without the use of auto-sensing ports, which of the following cables should be used? A technician is diagnosing an issue with a new T1 connection. The router is configured, the cable is connected, but the T1 is down. To verify the configuration of the router, which of the following tools should the technician use? A network technician receives a call from a use who is experiencing network connectivity issues. The network technician questions the user and learns the user brought in a personal wired router to use multiple computers and connect to the network.
Which of the following has the user MOST likely introduced to the network? A technician is setting up a direct connection between two older PCs so they can communicate but not be on the corporate network. The technician does not have access to a spare switch but does have spare Cat 6 cables, RJ plugs, and a crimping tool. The technician cuts off one end of the cable.
Which of the following should the technician do to make a crossover cable before crimping the new plug? Which of the following is the number of broadcast domain that are created when using an unmanaged port switch? A network engineer wants to a segment the network into multiple broadcast domains. Which of the following devices would allow for communication between the segments?
Management requests that the wireless network be changed so it is no longer accessible in public areas, without affecting the availability inside the building.
Which of the following should be changed on the network? A network technician is assisting the security team with some traffic captures. The security team wants to capture all traffic on a single subnet between the router and the core switch. To do so, the team must ensure there is only a single collision and broadcast domain between the router and the switch from which they will collect traffic.
Which of the following should the technician install to BEST meet the goal? Based on networks A technician discovers that multiple switches require a major update. Which of the following policies should be followed? A technician is troubleshooting a point-to-point fiber-optic connection. The technician is at a remote site and has no connectivity to the main site. The technician confirms the switch and the send-and-receive light levels are within acceptable range.
Both fiber SFPs are confirmed as working. Which of the following should the technician use to reveal the location of the fault? Which of the following should be leveraged to complete this task? Client PCs are unable to receive addressing information from a newly configured interface on a router.
Which of the following should be added to allow the clients to connect? When enabling jumbo frames on a network device, which of the following parameters is being adjusted? A technician logs onto a system using Telnet because SSH is unavailable.
SSH is enabled on the target device, and access is allowed from all subnets. The technician discovers a critical step was missed. Which of the following would allow SSH to function properly? A network administrator wants to ensure sensitive data is not exfiltrated from the system electronically.
Which of the following should be implemented? An office network consists of one two-port router connected to a port switch.
A four-port hub is also connected to the switch. On this particular network, which of the following is the number of collision domain that exist?
A network technician wants to remotely and securely access the desktop of a Linux workstation. The desktop is running remote control software without encryption. Which of the following should the technician use to secure the connection? Which of the following should current network performance be compared against to determine network anomalies?
A network administrator configures an email server to use secure protocols. When the upgrade is completed, which of the following ports on the firewall should be configured to allow for connectivity? After a server outage, a technician discovers that a physically damaged fiber cable appears to be the problem.
After replacing the cable, the server will still not connect to the network. Upon inspecting the cable at the server end, the technician discovers light can be seen through one of the two fiber strands. The backups server connects to a NAS device using block-level storage over Ethernet. The performance is very slow, however, and the network technician suspects the performance issues are network related. Which of the following should the technician do to improve performance?
From our dumpsbase platform you could search what exams you need then test or practice online by yourself. Download the PDF file if you need directly. Any other questions you can mail [email protected]. Your email address will not be published. Please enable JavaScript to submit this form. The cables have an incorrect pin-out. The cables are Cat 6 instead of Cat 5. The cables are not plenum rated.
Plug in a second spare cable at each end to double the speed. Replace the switches with ones that utilize port bonding and use the spare cables. Replace the switches with 10Gb switches and utilize the existing cabling.
Plug in a second cable and set one port to TX and one port to R. File size. Vendor URL. File hashing. Perform antivirus and anti-malware scans of the file. Download the file a second time and compare the version numbers. Compare the hash of the file to the previous firmware update. The firewall is misconfigured. The network is being hit by a zero-day attack. The SSL certificate is untrusted. The SSL certificate has expired. Data link. Commonly used on SAN.
MTU size greater than Commonly used on IaaS. Packet loss. Signal-to-noise ratio. Baseline report. Vulnerability report. Rollback plan. Business continuity plan. Perform a DNS lookup on the server. Set up an SSH session to the desktop. Reference the ARP table in the router.
Configure port security on the switch. Change the default password. Use a firewall in front of the device. Update the firmware. Upgrade the configuration.
Logic bomb. Insider threat. Social engineering. Utilize an SSH connection to the corporate server. Use TFTP to transfer files to corporate resources. Allow RDP through an external firewall. Connect utilizing client-to-site VP. Which of the following DNS record types is an alias? A trap message is sent via UDP to the monitoring workstation. The object identifier is modified and reported during the next monitoring cycle. Which of the following should be implemented to prevent performance degradaion?
Port mirroring B. Spanning tree C. ARP inspecion D. Which of the following antenna types will provide the BEST coverage?
High gain B. Bidirecional C. Dipole D. Omni-direcional Answer: A Quesion: 17 During a high availability test of a system, a iber interrupion did not re-route traic. This is an indicaion of which of the following rouing concepts? Staic B. Dynamic C. Hybrid D. Rouing loops Answer: A Quesion: 18 A technician has installed an There are a few users who have an Which of the following should the technician perform to ix the issue?
Upgrade the OS version to bit B. Install a vulnerability patch D. It oten takes unil the next day for the vendor to come out and ix the issue. Which of the following should the oice implement to reduce this downime? EULA B. SLA C. SOW D. The network technician noices that all the switch port lights on the front of each switch lashes rapidly when powered on and connected.
Addiionally, there are rapid lashing amber lights on the switches when they started up the next day. Which of the following describes what is occurring with the switches? The switches are running through their spanning tree process. The switches are having problems communicaing with each other. The switches are connected and detected a spanning tree loop. The switches are not funcioning properly and need to be disconnected. Test your N preparation with actual exam questions. Download PDF.
0コメント